Thanks for being a rad parent and getting your kid riding early. We are stoked how StaCyc bikes have been a part of my kids development and excited to share our BurroClaws with you guys..
If you have any questions on the install please check out the video on youtube or email me at TrophyBurro@gmail.com . We are here to help.
Please post some pics of your kids using #BurroClaws and tags us so we can report and check them out..
Happy Shredding to the little burritos
Simon @Trophyburro
Tools Required:
4.5 MM allen ( that is it )
HOW TO INSTALL
STEP 1
Remove old pegs
STEP 2
Flip the bike over and unscrew the two allen bolts The OEM foot pegs should slide forward once you remove bolts Be careful not to lose the 10mm Nuts..
STEP 3
Slide the new peg over the tab . Tighten the screw down and use the peg to hold the 10mm nut
STEP 4
Happy shredding!
PS
There have been a few bikes that have extra thick powder coating and or welds. It has prevented the pegs sliding on smoothly. What I did was take a small file and file the extra powder and guide the peg over it with a few taps of a hammer. If we make them too big then there is a chance it will move and come loose. So we chose to lean on the side of tight. If you need any help email or DM me and I’ll talk you through it